 |
 |
 |
|
The JBJ 28 Gallon Nano-Cube HQI-Reef Series incorporates many high-tech features not commonly found in "All-In-One" systems. The new concept behind the 28 Gallon Nano-Cube HQI was inspired by hundreds of reef hobbyists who requested higher powered lighting, protein skimming, increased water circulation, a more simplified filter, storage area in the stand for chillers, and designated water level columns in the rear chambers for heaters, refugiums and protein skimmers (heater & refugium not included).
General Specifications:
- Tank Volume: 28 gallons
- Glass Thickness: 6mm
- Dimensions: 18" X 22" X 22"
- User Manual (pdf format in new window)
Lighting Features:
 -
150W HQI/14K Light with German parabolic reflector. Enough light for hard corals & clams.
- Four Nite-Vu LEDs with separate power cord. One LED located in each corner. LEDs plug in for easy replacement. LED photo in new window.
Pump & Filtration Features:
 - Water is directed into a 3-Stage filter media basket, which comes
installed with a mechanical sponge, chemical activated carbon and
biological ceramic rings. The 3-Stage filter media basket can host a
variety of chemical medias to suit your needs. Cleaning is especially
easy since all you have to do is lift up on the basket handle and watch
the water drain out the bottom for a simple and dry filter change. All
baskets have a sliding door for added convenience.
- Once the water leaves the filter basket water is split to the
designated heater column (heater not included) to the left and the counter current, air-driven protein skimmer to the
right. The area that contains the heater, protein skimmer and 3-Stage Filter media basket always has a constant water level.
- Once the water is heated and skimmed, the water overflows into the pump
water columns. Water is directed back into the main body of the
aquarium via (2) UL-Listed Accela Pumps rated at 266gph at a low energy draw of
16W. The Nano Cube HQI also includes the Ocean Pulse Duo Wavemaker,
which creates turbulent currents for a more natural reef environment.
Your wavemaker can be set from 10 seconds to 6 minute alternating
cycles. Water is returned via (2) directional return nozzles on each
side of the center overflow for even natural currents.
Protein Skimmer Features:
- The first Nano-Cube to incorporate an integrated protein skimmer in the
rear chamber with an adjustable hanging bracket. This counter-current
design effectively removes dissolved organics while oxygenating the
water. This protein skimmer produces absolutely NO micro-bubbles back
into the main body of the aquarium! Discarding the skimmate in the
collection cup is easily accomplished by removing the removable cup or
by setting up a skimmate container such as an empty 2-liter soda
bottle. A drain hole and hose is provided for the latter option. Air
pump and hose is included with a replaceable wooden air stone. The
collection cup holds approximately 0.30 liters of skimmate. Water level
is held constant in the protein skimmer column even when the rear
compartment filter area runs dry.
Each skimmer is equipped with an adjustable hanging bracket.
Cooling Features:
- Four Integrated cooling fans (3000rpm`s) will keep the canopy cool. The fans are on two separate circuits in case one of the fans fail. If all the fans fail a thermal protector will automatically shut off the HQI lighting system until temperatures reach safe conditions.
Other Features:
- Flame retardant ABS canopy housing
- Feeding lid for easy access for feeding and to retrieve water samples without lifting the entire hood. Feeding hole photo in new window.
|
|
|
|
|
|
|
